I have been developing a new method of encaustic painting called Paint Smash–the method is not so unlike the same term used to reference infants playing with paint–but I’m a real artist, you see ; ) Real artist or not, I still need to loosen up and get back to my inner infant artist and this is how I came to Paint Smash. In my last post I confessed that I have slowly been giving up the use of traditional brushes for DIY alternatives when painting in encaustic. I shared with you one of my brush making techniques using flashing to form any brush shape and size your waxy heart desires. Using tools like my flashing brushes in conjunction with other tools like mallets, brayers, rolling pins, fists, fingers and whatever else you can find, I’m pushing, smearing, slathering, punching, modeling the paint onto the substrate instead. Encaustic is a unique painting medium in that it can be worked as a liquid, solid and semi-solid, which lends itself fantastically to paint smashing. This tutorial is the start of a series of Paint Smash techniques that I will share with you in subsequent blog posts.
Please stayed tuned for my next post, another segment of Paint Smashing in which I show you the amazing things that are revealed when you scrape back your Paint Smash. Super fun!
But before we discuss scraping, you have to learn how to use your new amazing flashing brushes, it’s truly deceptively simple.
What you need
- A variety of DIY flashing brushes and/or metal clay scrapers and/or Venetian Plaster applicators (see this post for how to make flashing brushes and/or prepare clay scrapers for encaustic painting)
- Encaustic paint in a variety of contrasting colors AND lots of white-a variety of whites is best.
- A variety of traditional encaustic painting brushes-hog’s bristle or hake.
- A torch or heat gun for fusing (torch is best for this technique)
- 2-6 painting panels prepared for encaustic painting
How To Do (Scroll down for video links)
- Line up your traditional and alternative brushes on your griddle like you normally would for encaustic painting.
- The griddle should be nice and hot (up to 200-215 degrees, check your surface temp) the paint should be swimmingly melty.
- Line up your boards (at least 2-4) side by side or in a grid. Prepare them with a few solid areas of color that you can apply using any brush you like, but this part is easier with a traditional encaustic brushes. You can also pour the paint instead of painting and not use a brush at all.
- I always begin with a patchwork of blocks or a loose grid of overlapping strips of color in a variety of sizes, but you can paint anything you want. Whatever you paint, make sure you are painting over all of your boards with continuity and not making a distinction between separate boards.
- Fuse with a torch. Your painting surface should be nice and hot (but not smeary) after this fuse.
- Using one of your alternative brushes, scoop/lift the paint from the griddle surface-you can use one or both sides of the brush. Your brush should bend/flex a little as you pick up the paint.
- Transfer the paint to your painting surface by slowly slathering it on sort of like frosting a cake. Flip your brush from front to back as you transfer the paint. Again, your brush should flex a little as you paint. These early layers will go on relatively flat, but subsequent layers will cling and this is where it gets interesting.
- Change to a contrasting color and repeat the alternative brush painting process several times.
- Fuse every 2-3 layers.
- After a few uses of your alternative brush, add some areas of solid color with your traditional brushes. Preferred colors at this stage are white or lighter colors or very dark colors that will contrast and visually ‘clean up’ the chaotic mess you’ve seemingly made.
- Continue painting in this way until you’ve built up 10-20 layers–10 being at the lowest points (the valleys) and 20 being the the highest points (the hills). In other words, your paintings should be highly textured and multi-dimensional, ready for their first scrape.
Want to see a video demonstration of these techniques?
To see a video of scooping the paint from the griddle and applying it to the substrate, go to my new IGTV (InstagramTV) channel (@lorraineglessner1)